Datamax Allegro 2 Manuel d'utilisateur télécharger pdf (Page 48)

Creating Labels Using Internal Batch Software

40 Allegro2

3.3 Create/Modify Label Screen

This section describes how to create a new label. Before beginning,

a good tool to have on hand is a ruler marked in tenths of an inch

because all the label format print positions are specified in tenths

and hundredths of an inch. The procedure for creating a new label

is as follows:

1. Power up the CRT terminal with the switch on the front of

the unit. Turn the Printer on with the Power Switch located

in the back of the Printer. The CRT screen will look like

this:

PRINT LABEL

MODULE NAME: ________________

LABEL NAME: ________________

QUANTITY: ________________

Figure 3-2 Print Label Screen Header

Press the F1 key, and the screen will look like this:

CREATE/MODIFY LABEL

MODULE NAME: ________________

LABEL NAME: ________________

ROT FNT XW XH BH ROW COL TYPE DATA/PROMPT

--- --- -- -- --- ---- ----- ----- ------------------------

Figure 3-3 Create/Modify Label Screen Header

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 114 115

Pas de commentaire

Datamax Allegro 2 Manuel d'utilisateur Page 48