Datamax I-Class Manuel de l'opérateur télécharger pdf (Page 105)

I-Class 95

Fault Messages (continued)

Fault Messages

Displayed Message Description Action(s)

TOP OF FORM FAULT

The printer could not find

the TOF within the

maximum label length

setting, or TOF occurred in

an unexpected place.



Note: When using

reflective media, this fault

is given for an Out of Stock

condition.

If media is moving:

1) Press the FEED Key. It may be

necessary to re-calibrate the

printer; see Section 5.2.

2) The Media Sensor may be out

of position. Readjust it; see

Section 3.3.

3) The media may not be

properly loaded. Reload

media, ensuring that the

Media Guide is properly

positioned; see Section 3.2.

4) The Leveling Cam may be

improperly adjusted; see

Section 5.4.1.

5) The label may be longer than

the value entered. Check the

Media Settings / Maximum

Label Length; see Section

4.2.2.

6) The Media Sensor may be

obstructed. Check and

carefully remove any

obstruction (labels, paper

dust, adhesive, etc).

If media is not moving:

The printhead assembly may not

be locked.

VERIFIER FAULT

The Verifier could not pass

a bar code.



Note: This is normal

when a bar code is

unreadable.

Simultaneously press the ENTER

and F1 Keys on the Verifier to

clear the fault. If the fault

persists, consult the option’s

instructions.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Datamax I-Class Manuel de l'opérateur Page 105

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de codes-barres Datamax I-Class