Datamax H-4606X Manuel de l'opérateur télécharger pdf (Page 124)

114 H-Class

Fault Messages (continued)

Displayed Message Description Possible Solution(s)

RIBBON FAULT

Two causes are possible:

(1) The Thermal Transfer

media type has been

selected, but no ribbon

movement or only

sporadic movement has

been detected.

(2) The ribbon sensor

values have changed.

If using direct thermal stock,

change the Media Type setting

to Direct Thermal; otherwise

ensure that ribbon is installed.

Press the FEED Key to clear the

fault -- if the fault does not

clear check the Ribbon Hubs for

free movement. Also, ensure

that the ribbon core fits snugly

onto the supply hub, and that

the ribbon is not slipping or

stalling as labels print. If no

binding, slipping, or stalling is

apparent press and hold the

FEED Key until at least three

labels have been output. If the

fault does not clear, call for

service.

TEMPERATURE FAULT

The printer has

shutdown due to the

printhead temperature.

Turn OFF the printer. Ensure

that the printer has been

installed within an acceptable

environment. DO NOT restart

until the printhead cools.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 185 186

Pas de commentaire

Datamax H-4606X Manuel de l'opérateur Page 124