Datamax H-4606X Manuel de l'opérateur télécharger pdf (Page 59)

H-Class 49

Printer Options (continued)

Menu Item Details

END OF PRINT

Sets the type of output signal generated to indicate

End of Print (EOP), where:

LOW PULSE

Outputs a low pulse upon completion.

HIGH PULSE

Outputs a high pulse upon completion.

ACTIVE LOW

Outputs a logic low upon completion.

ACTIVE HIGH

Outputs a logic high upon completion.

RIBBON LOW

Sets the output signal type generated to indicate a low

ribbon condition (as determined by RIBBON LOW

DIAMETER; see RIBBON LOW OPTIONS, Section

4.2.1), where:

ACTIVE LOW

Outputs a logic low when the roll reaches the setting.

ACTIVE HIGH

Outputs a logic high when the roll reaches the setting.

SLEW ENABLE

Selects the type of input signal required to initiate

label slew, where:

STANDARD

Triggers slew with a low signal.

LOW PULSE

Triggers slew with a low pulse.

HIGH PULSE

Triggers slew with a high pulse.

ACTIVE LOW

Triggers slew with a low signal.

ACTIVE HIGH

Triggers slew with a high signal.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 185 186

Pas de commentaire

Datamax H-4606X Manuel de l'opérateur Page 59