Datamax A-Class Mark II Manuel de l'opérateur Page 26
- Page / 160
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
16 A-Class Mark II
To copy firmware stored on a module to the printer:
1. Press the TEST button then select User Defined Label.
2. Select the module ID and the firmware file.
To print files stored on a module:
1. Press the TEST button and then select User Defined Label.
2. Select the module ID then the file to print.
To print directly from stored files at power-up, see User Label mode in Section
4.2.4.
To print a previous label format that is stored in memory:
1. Press the MENU button then select Printer Options.
2. Select Modules and then Print File.
2.4 Connecting an Applicator
Setup the GPIO Port using the information in Appendix D and then connect the applicator cable to
port(s) on the Applicator Interface Card.
Failure to properly configure the GPIO Port(s) may result in damage to the printer
and / or the applicator.
If upgrading, a PE to A-Class GPIO conversion cable is available; see Appendix C.
- Operator’s Manual 1
- Special Text Instructions 5
- Applicability 5
- Contents 7
- Overview 11
- 1.1.1 Standard Features 12
- 1.1.2 Optional Features 13
- Installing Printer Options 14
- Getting Started 15
- 2.1.1 Contents 16
- 2.2 Mounting Requirements 17
- Mounting Holes 17
- 8 A-Class Mark II 18
- A-Class Mark II 9 19
- 10 A-Class Mark II 20
- 2.3 Connecting to a Host 21
- A-Class Mark II 22
- Main Logic Card 23
- 14 A-Class Mark II 24
- 2.3.4 USB Port Connections 25
- 16 A-Class Mark II 26
- 2.5 Connecting Power 27
- 18 A-Class Mark II 28
- Setting up the Printer 29
- Media Guide 31
- Locking Post 32
- A-Class Mark II 23 33
- 3.3 Loading Ribbon 34
- A-Class Mark II 25 35
- 3.3.2 Left Hand Models 36
- 3.3.3 Removing Ribbon 37
- 3.4 Quick Calibration 38
- 3.5 Print Quality Controls 38
- Using the Control Panel 39
- PL Z PL BPL I 40
- 4.1.2 Keypad Functions 41
- 4.2 The System Menu 42
- 4.2.1 Media Settings 43
- 0 – 2.00 in.) 44
- A-Class Mark II 35 45
- Section 7 for label details 46
- A-Class Mark II 37 47
- 4.2.3 Printer Options 48
- A-Class Mark II 39 49
- 40 A-Class Mark II 50
- A-Class Mark II 41 51
- 42 A-Class Mark II 52
- A-Class Mark II 43 53
- 44 A-Class Mark II 54
- A-Class Mark II 45 55
- 4.2.4 System Settings 56
- A-Class Mark II 47 57
- 48 A-Class Mark II 58
- A-Class Mark II 49 59
- 50 A-Class Mark II 60
- A-Class Mark II 51 61
- 52 A-Class Mark II 62
- A-Class Mark II 53 63
- 54 A-Class Mark II 64
- A-Class Mark II 55 65
- 4.2.5 Communications 66
- A-Class Mark II 57 67
- 000.000.000.000 68
- A-Class Mark II 59 69
- 60 A-Class Mark II 70
- A-Class Mark II 61 71
- 62 A-Class Mark II 72
- A-Class Mark II 63 73
- 4.2.6 Diagnostics 74
- A-Class Mark II 65 75
- 66 A-Class Mark II 76
- 4.2.7 MCL Options 77
- 4.3 The Test Menu 78
- 4.3.3 Test Label 79
- 4.3.4 Validation Label 79
- 4.3.5 Print Configuration 79
- 4.3.6 Print Last Label 80
- 4.3.7 User-Defined Label 80
- Operating, Adjusting and 81
- Maintaining the Printer 81
- 72 A-Class Mark II 82
- A-Class Mark II 73 83
- 5.2 Calibration 84
- A-Class Mark II 75 85
- 5.2.2 Advanced Entry 86
- A-Class Mark II 88
- The re-sampled values may 91
- 82 A-Class Mark II 92
- 5.3 Printhead Adjustments 93
- Leveling Cam 94
- 5.3.2 Burn Line Adjustment 95
- 5.4 Printhead Replacement 96
- Printhead Assembly 97
- Access Cover 97
- 88 A-Class Mark II 98
- Platen Roller 99
- 5.6 Maintenance Schedule 100
- A-Class Mark II 91 101
- 92 A-Class Mark II 102
- 5.6.2 Cleaning the Rollers 103
- Peel Assembly 104
- Peel Assembly Release Lever 104
- Head Lift Lever 104
- Latch Roller 105
- Knurled Roller 105
- 96 A-Class Mark II 106
- 5.7 Reset Methods 107
- 5.8 Updating the Firmware 108
- A-Class Mark II 99 109
- 100 A-Class Mark II 110
- 5.10 Fonts 111
- 102 A-Class Mark II 112
- Troubleshooting 113
- 104 A-Class Mark II 114
- A-Class Mark II 105 115
- 106 A-Class Mark II 116
- A-Class Mark II 107 117
- 108 A-Class Mark II 118
- A-Class Mark II 109 119
- 110 A-Class Mark II 120
- A-Class Mark II 111 121
- When the SENSOR 122
- 6.2 Hex Dump Mode 123
- 114 A-Class Mark II 124
- Specifications 125
- Electrical 126
- Environmental 126
- Mechanical 126
- Printing 127
- 118 A-Class Mark II 128
- A-Class Mark II 119 129
- 120 A-Class Mark II 130
- A-Class Mark II 121 131
- 122 A-Class Mark II 132
- Appendix A 133
- File Handling Messages 134
- Cut Behind Setup 135
- 126 A-Class Mark II 136
- Appendix B 137
- 128 A-Class Mark II 138
- Appendix C 139
- 130 A-Class Mark II 140
- Appendix D 141
- 132 A-Class Mark II 142
- Pins 1 – 2 = +5VDC; 143
- Pins 2 – 3 = +24VDC; or 143
- None = A common external 143
- 134 A-Class Mark II 144
- A-Class Mark II 135 145
- 136 A-Class Mark II 146
- Signal Out 147
- Signal In 147
- GPIO SIGNAL INFO 148
- Appendix E 149
- 140 A-Class Mark II 150
- A-Class Mark II 141 151
- 142 A-Class Mark II 152
- Appendix F 153
- 144 A-Class Mark II 154
- Appendix G 155
- 146 A-Class Mark II 156
- Glossary 157
- 148 A-Class Mark II 158
- A-Class Mark II 149 159
Produits connexes et manuels pour Lecteurs de codes-barres Datamax A-Class Mark II
(4 pages)
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels