Datamax All in One Printer datamax-o'neil Manuel d'utilisateur

Thermal Transfer Option 92-2431-01 Rev.C

8 If experiencing this problem… Try this solution… Labels and ribbon advance normally, but no image is printed: Examine the used ribbon for an

9 Selecting Media and Ribbon Because the media and ribbon used will determine the printer’s heat and speed settings, consider these factors when s

1 Overview This document describes the contents, installation, and use of the Thermal Transfer option for the H-Class printer. After verifying the

2 Step 1: Preparing the Printer (continued…) B) Raise the Access Cover. If installed, remove your media from the printer. Access

3 6” and 8” printers only B) Using a Cotton Swab or cloth, moistened with isopropyl alcohol, gently clean the surface where the Static Brush will b

4 Step 4: Aligning the Ribbon Path Thermal transfer printing relies on a smooth, taut flow of ribbon for consistent print quality; to accomplish

5 C) Press the FEED Key several times, until media tracking is normalized through the printer. Then, while feeding several more labels, observe the

6 E) Wrap the Ribbon in a clockwise direction around the Take-Up Hub. Press the TEST Button on the Front Panel then use the UP / DOWN Buttons to sele

7 F) Press the TEST Button then use the UP / DOWN Buttons to select the PRINT QUALITY LABEL or the TEST LABEL. Set a quantity of labels to print and